ActiGraph CentrePoint Insight Watch User Manual page 9

Assigning the Insight Watch to a Subject
2
Pair the Insight Watch with a CentrePoint (CP) Data Hub
(If you are not using a CP Data Hub, skip ahead to Information for Subjects)
The CP Data Hub passively acquires collected raw accelerometry data from the Insight Watch and transmits to the
cloud-based CentrePoint system over a cellular network.
1
2
3
9
10/19/2018 | Revision: 0
Connect the adapter end of the power cable into the back of the CP Data Hub and plug the other end into
a wall outlet.
Connect the charging dock to the USB port on the CP Data Hub using the USB cable.
Insert the Insight Watch into the charging dock. Once connected, a progress wheel will appear on the screen
indicating that an upload has begun. When the upload is complete, a checkmark will appear on the screen.
Warning Sign
If you see a warning sign on the screen of the Insight Watch, remove it from the charging dock and insert again.
Make sure you see a checkmark on the screen before proceeding to the next step.
(Continued)
Upload in Progress
Upload Complete
actigraphcorp.com