ActiGraph CentrePoint Insight Watch User Manual page 12

Information for Subjects
3
Setting up the CP Data Hub at home
(If you are not using a CP Data Hub, skip ahead to Uploading Data to CentrePoint)
The CP Data Hub should be placed at home in a location where the subject spends most of his or her time.
1
2
3
4
12
10/19/2018 | Revision: 0
(Continued)
Connect the adapter end of the power cable into the back of the CP Data Hub and plug the other end into
a wall outlet.
The blue LED on the back of the CP Data Hub will begin to flash during startup. Once the CP Data Hub
connects to the cellular network, the blue LED will stay on solid.
USB Port
Once the CP Data Hub is connected, use the USB cable to connect the charging dock to the CP Data Hub.
Insert the Insight Watch into the dock for charging or docked data uploads, as determined by the study
parameters.
Note: The Insight Watch automatically transmits raw data via Bluetooth® to the CP Data Hub each day. It
is not necessary for the subject to dock the Insight Watch to upload data from home.
Power Status Light
actigraphcorp.com