Accessories; Xlpro Excel Add-In - Radcal Accu Series User Manual

XLPRO Excel add-in

XLPRO is a Microsoft Excel add-in that provides control and communication within Excel via the USB
connection. It uses the computational and display capabilities of Excel to record, analyze and display
Accu-Pro™ measurement results on a PC. XLPRO can control the Accu-Pro™ system as well, so test
protocols can be automated to provide consistent results and guided operation.
Using XLPRO
Connect a USB cable between the PC and the Accu-Pro™ control unit. If the green
!
LED illuminates (it is not very bright) the Radcal USB software is installed on the
PC; otherwise you need to install XLPRO version 4 or later.
Turn on the Accu-Pro™, wait for self-test to completed, and then start XLPRO.
!
XLPRO is now in control of the Accu-Pro™. select, UP and DN are disabled. The
!
display reads:
While XLPRO is making measurements the display will show measurement results in default units: R,
/min, fixed Temperature and Pressure . Unit conversion and environmental correction is handled within
XLPRO. The user selections are restored when the USB is disconnected or when XLPRO ends.
While the USB is active, the power-off timer is disabled.
Figure 26 - XLPRO sample

ACCESSORIES

Control locked
by PC over USB
41