Safety; General Information - SCS LABCOTER 2 Operator's Manual

OM-610-1002-1
SECTION 1
This equipment is designed to be used in the specific manners designated. Key elements in the design
promote operator safety and assure that there will be no damage to the product being coated. The
equipment complies with all applicable sections of NFPA Article 79 of the National Electric code (NEC).
All commercially standard components used in this machine have a minimum of UL and/or CSA ratings.
Components built to CE standards have been used wherever possible. Any local or regional certifications
required above and beyond the aforementioned are the responsibility of the customer. Efforts are also
continuously made to include CE compliant components wherever possible.
1.1

GENERAL INFORMATION

The following warning symbols are used through out this manual:
HOT SURFACE
ELECTRICAL SHOCK
FREEZING HAZARD
GENERAL WARNING
This equipment is designed to be used in the specific manners designated. The equipment complies with all
applicable sections of NFPA Article 70 of the National Electric Code (NEC). Any local or regional
certifications required above and beyond the aforementioned statement are the responsibility of the buyer.
WARNING: Safety pays. Improper operation or service of the 2010 can result in serious
injury or death. Read and understand this entire instruction manual before operating or
servicing this equipment.
CAUTION: The 2010 is equipped with a grounding-type power plug, which must be
connected to a grounded outlet to prevent electrical shock.
PDS-2010

SAFETY

Operator's Manual
SECTION 1 SAFETY
Rev 37
page
1