Package Contents; Hardware Installation; Quick Installation Guide - D-Link DCS-3411 Quick Install Manual

Quick Installation Guide

Package Contents

If any of the items are missing, please contact your reseller.
DCS-3411/3430 2 Antennas
Day & Night (DCS-3430 only)
Network Camera
Note :
Using a power supply with a different voltage rating will
damage and void the warranty of this product.

Hardware Installation

Attach the Antennas (DCS-3430 only)
Locate the antennas included with your DCS-3430,
and attach them to the antenna connectors located
on the back of the DCS-3430.
Connect the Ethernet Cable
Connect an Ethernet cable to the network cable
connector located on the Network Camera's back
panel and attach it to the network.
Connect Using Power-Over-Ethernet (DCS-3411only)
Once you connect an Ethernet cable to your PoE switch or adapter, the Power
LED on the DCS-3411 will turn red to indicate a proper connection.
DCS-3411/3430
Day & Night Network Camera
Camera
Mounting
Bracket
2
CD-ROM with Ethernet (CAT5
Manual and UTP) Cable
Setup Wizard
12V Power
Adapter