Safety And General Information; Product Description; Specifications - Omega Lift 43000 Operating Instructions & Parts Manual

Transmission jack, floor. capacity 3000-lb.
Table of Contents

Advertisement

Available languages

Available languages

SAFETY and GENERAL INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack
before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating
procedures before attempting to use. The owner and operator shall be aware that use and repair of this product
may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's
native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of this jack,
remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any jack that appears
damaged in any way, or operates abnormally shall be removed from service immediately. If the jack has been or
suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately
discontinue use until jack has been checked by a factory authorized service center (contact distributor or manufacturer
for list of authorized service centers). It is recommended that an annual inspection be done by qualified personnel.
Labels and Operator's Manuals are available from manufacturer.

PRODUCT DESCRIPTION

This Transmission Jack is designed to be used as an aid in the removal and installation of automotive and light truck
transmissions, transfer cases and transaxles. This jack is for use under portable lift equipment, where vehicle must
be supported by a pair of appropriately rated jack stands.
!
NEVER use for any purpose other than those uses outlined above!

SPECIFICATIONS

Model
Capacity
43000
3000-lb.
*Oil Filler Plug (not shown)
Handle
Min.
Max.
Height
Height
7-7/8"
37-1/4"
Tilt Adjustment Knob
Lift Arm
(*) on the hydraulic unit,
below the lift arm
Handle Sleeve
Release Valve Knob
Figure 1- Typical Transmission Jack Components
Power
Raise
29-3/8"
Saddle Plate
2
Chain
Caster

Advertisement

Table of Contents
loading

Table of Contents