Notes Concerning Measuring Sequence; Maintenance; Cleaning Of The Transparent Ring - BLUM TC Series Operating Instructions Manual

4. Notes concerning measuring sequence


Start measuring block only when interference-free radio transmission with
radio receiver is guaranteed (signal level Error = High)
 Installation instructions radio receiver RC66
 Installation instructions Interface IF59

5. Maintenance

 •
•
•

5.1 Cleaning of the transparent ring

Please do always use mild detergents (e.g. neutral soap solution or diluted

washing-up liquid) for cleaning of the transparent ring. Please do always
use a soft, clean cloth to clean.
CAUTION Damage of the transparent ring
Please, do not use any detergents containing acetone, alcohol, cleaning
benzine or solvent! They can damage the transparent ring.
Please, do not use any detergents containing abrasive substances (e.g.
scouring powder or cleansing milk. They can damage the transparent ring!
 by Blum-Novotest 2012
(P03.6600-000.011)
(P03.5900-000.011)
The probe needs minimum maintenance only
Keep the glass ring clean
Check bellows for damages
Notes concerning measuring sequence
29