BLAUBERG Ventilatoren AH-8 Installation Instruction

Outer ventilation hood with frost protection

OUTER VENTILATION HOOD

WITH FROST PROTECTION

АН-8

INSTALLATION INSTRUCTION

Table of Contents

Need help?

Do you have a question about the AH-8 and is the answer not in the manual?

Page 1 OUTER VENTILATION HOOD WITH FROST PROTECTION АН-8 INSTALLATION INSTRUCTION...
Page 2: Overall Dimensions
АН-8 www.blaubergventilatoren.de PURPOSE The outer ventilation hood is designed to prevent ingress of water and foreign objects into the ventilation equipment from outside and to protect the ventilation duct and equipment inside it from frost. THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT THE APPROPRIATE TRAINING.
Page 3 10 mm (3/8") 2. Mark the fastening holes for the outer ventilation hood and AH-8 125 | 160 | 150х150 | 164x164 AH-8 100 drill 4 holes, 50 mm (2”) deep to suit the expansion anchors (6x40) 6 mm (3/16”)x40 mm (19/16”).
Page 4: Connection To Power Mains
АН-8 www.blaubergventilatoren.de 5. Cover the ventilation hood with the front part. CONNECTION TO POWER MAINS Outer ventilation hood is equipped with frost protection. The power consumption of the hood depends on the temperature conditions and is no more than 60 W (230 V/50 Hz). Sustaining current is 0.26 A. TERMINAL DESIGNATIONS ON THE WIRING DIAGRAM: L - phase N - 0...
Page 5 АН-8 www.blaubergventilatoren.de...
Page 6 АН-8 www.blaubergventilatoren.de...
Page 7 АН-8 www.blaubergventilatoren.de...
Page 8 www.blaubergventilatoren.de B113-10EN-01...