Page 1
2K 600mL Dispense Guns with Built-In Retainers Operating Manual ™ Electronic pdf files of Nordson EFD manuals are also available at www.nordsonefd.com...
Page 2
Thank You! You have just purchased the world’s finest precision dispensing equipment. I want you to know that all of us at Nordson EFD value your business and will do everything in our power to make you a satisfied customer.
Part Numbers ....................................11 Troubleshooting ................................... 11 Introduction Manual and pneumatic 2K dispense guns with built-in aluminum retainers are used for the dispensing of filled Film-Pak collapsible cartridges. Manual guns are available in two thrust ratios for the dispensing of thicker ®...
2K 600mL Dispense Guns with Built-In Retainers Safety 2K dispense guns are designed for heavy duty cycles over extended operating periods. Because they are powered by compressed air, operator fatigue is minimal, but users must be aware that compressed air can be dangerous when used incorrectly.
Forward / Reverse air toggle Spring- Swing plate loaded lock Air input fitting Fluid pressure regulator knob Fluid level indicator Built-in aluminum retainers Trigger Cradle-support handle www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
1/4 NPT male thread Air supply to the gun: 7–8 bar (100–115 psi) Maximum 8 bar (115 psi) Filling Cartridges To fill Film-Pak cartridges, refer to the filling instructions at www.nordsonefd.com/Film-PakFilling. www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
Slide filled Film-Pak cartridges into the aluminum retainers. Close the swing plate and engage the spring- Attach the static mixer. If applicable, add the loaded lock. retaining nut. www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
Note: Perform this process for each new or partially used cartridge. Handle Throughout the dispensing process, check the fluid level indicator to see how much material remains in the cartridges. Fluid level indicator www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
Slide filled Film-Pak cartridges into the aluminum retainers. Close the swing plate and engage the spring- Attach the static mixer. If applicable, add the loaded lock. retaining nut. www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
When you release the trigger, Fluid level indicator material flow ceases as the compressed air escapes rapidly through a quick exhaust valve at the rear of the gun. Trigger www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
3. For the material being dispensed, read all of the instructions and warnings for other possible risks. Contact the material manufacturer for clarification as needed. www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
Page 12
NORDSON EFD ONE YEAR LIMITED WARRANTY Nordson EFD products are warranted for one year from date of purchase to be free from defects in material and workmanship (but not against damage caused by misuse, abrasion, corrosion, negligence, accident, faulty installation or by dispensing material incompatible with equipment) when the equipment is installed and operated in accordance with factory recommendations and instructions.