600ml dispense guns with built-in retainers (12 pages)
Summary of Contents for Nordson EFD 2K Pneumatic Dispense Gun
Page 1
2K Pneumatic Dispense Gun: 1500mL Instructions Steps 1. Lube o-rings with grease. 2. Insert union tube into casting. 3. Assemble main handle into union tube. 4. Insert handle nuts into main handle. 5. Insert screws into main handle and tighten.
Page 2
2. With the regulator at low pressure, switch the forward/reverse button to the forward position and then actuate the trigger to allow the rods to travel For Nordson EFD LLC sales and service in over 40 countries, contact Nordson EFD or go to www.nordsonefd.com...