Amron AMCOM III series User Manual page 32

2830A THREE DIVER COMMUNICATOR USER MANUAL
6.5.9 PUSH-TO-TALK DOES NOT WORK
If used, check the connection to the handheld microphone. A common issue is that
the yellow banana plug is not properly seated in the PUSH-TO-TALK JACK. If the
tender is using the PANEL SPEAKER as the microphone with the PUSH-TO-TALK
BUTTON, make sure the SPEAKER SWITCH is turned on. If neither of these
solves the problem, there could be a broken wire inside the diver communicator.
Open the front panel by removing the four thumb screws and gently lift the front
panel by the handles. Inspect the wiring for breaks and make sure all the
connectors are firmly seated on the PCA. . If that does not resolve the problem
then contact Amron per section 2.2 for further assistance.
2830A-UM REV 5.0
28