Table of Contents
Advertisement
4 Configuration
4.1 Configuration Equipment Requirements
The following items will be needed when configuring a uDL1.
uDL1 USB Cable (W164IFUDL01)
Programming Application and Driver Media (CD or USB flash drive)
To use a PC to communicate with the uDL1, you will require the media (CD or USB flash drive) that shipped
with the uDL1. The media contains drivers and the uDL1 configuration application. If you do not have the
media, the contents can be downloaded from the Mobiltex web site at the following URL.
http://www.mobiltex.com/cathodic/udl1
The installation media contains configuration applications for both the uDL1 and the uDL2.
Personal Computer (PC)
The application software and drivers require that the PC be running Windows XP SP3 or higher for an operating
system. The PC must have an available USB port.
4.2 Software Installation
To install the configuration application and driver software, insert the media (CD or USB flash drive) that came with
the configuration interface into the appropriate drive or USB port on the PC. If "autorun" is enabled on the PC, the
screen in Figure 8 will appear.
If "autorun" is not enabled, or the contents of the media have been copied to a local directory, use Windows Explorer to
navigate to the media drive or the directory containing the installation software.
"uDLINSTALLER.exe" application. The dialog on Figure 8 will appear.
Figure 8 uDLInstaller Dialog
MOBILTEX® DATA LTD.
Calgary, Alberta
www.corTalk.com
TITLE: uDL1 Configuration and Operation Guide
DOCUMENT NO.:
SHEET:
UDL1-MAN-001
Double-click on the
REV:
9 of 26
1.07
Advertisement
Table of Contents
