Table of Contents
Advertisement
4.3 uDL1 Configuration and Extraction
Attach the supplied USB cable between the PC and the uDL1.
Start the configuration software by clicking on "uDL1 Configuration" shortcut in Windows start menu, under the "uDL1
Configuration Application" folder. The following screen will appear.
Figure 12 uDL1CONFIG Main Screen
4.3.1 uDL1 Communications and Status
4.3.1.1 Read Config From uDL1
The first step in configuring a device is to read in the current settings from the unit. Click on "Read Config From uDL1".
The "Link Status" field will briefly show "Busy" as the current configuration parameters are read from the uDL1. After
the link status returns to "Idle", you will see the configuration settings currently in the uDL1. If the uDL1 is not
responding or not connected, an error dialog will pop up. If it is not connected, simply connect the USB cable to the
computer and try again. If the uDL1 LCD display is showing 'bSY', wait until 'USb' is shown before attempting to
read the configuration from the uDL1.
Once communications have been established with the uDL1, the operational parameters can be configured for the
requirements of a particular measurement session.
4.3.1.2 Write Config To uDL1
Once all configuration items have been set as desired, click the "Write Config to uDL1" button to write the configuration
to the uDL1 and activate it.
4.3.1.3 Link Status
The "Link Status" field will indicate "Disabled", "Busy" or "Idle". While "Busy" is shown, the application is actively
communicating with the uDL1 hardware. The application will not respond to further actions while "Busy" is displayed.
The uDL1 can be unplugged at any time from the USB port. However if you have changed any parameters, be sure to
write them to the uDL1 before unplugging the device.
4.3.1.4 Factory Options
The "Factory Options" box will display any factory configured options. A basic uDL1 will show "None", whereas an
advanced uDL1 will show "GPS TIMESYNC" and "LARGE MEM".
MOBILTEX® DATA LTD.
Calgary, Alberta
www.corTalk.com
TITLE: uDL1 Configuration and Operation Guide
DOCUMENT NO.:
SHEET:
UDL1-MAN-001
REV:
12 of 26
1.07
Advertisement
Table of Contents
