Table of Contents
Advertisement
6 Firmware Updates
As required, Mobiltex will periodically release firmware update packages for the uDL1. The firmware is included with
the configuration application package. The uDL1 configuration application will warn the user if a firmware update is
necessary on an attached uDL1.
To update the uDL1 firmware, exit the uDL1 configuration application and execute the uDL1 Firmware Update
application from the Windows start menu. The dialog in Figure 24 will be shown.
Figure 24 uDL1 Firmware Update Application Dialog
To start the firmware update process, first ensure that the uDL1 is connected to a USB port on the computer. Next, click
on the 'Program Firmware' button. The application will indicate progress as the firmware is downloaded to the uDL1
(see Figure 25). Do not attempt to interrupt the firmware download process once it has started. Once the message
'uDL1 completed firmware programming' is display, exit the firmware update application. The uDL1 will reboot and
can then be used immediately with the configuration application.
Figure 25 uDL1 Firmware Update Application Progress
MOBILTEX® DATA LTD.
Calgary, Alberta
www.corTalk.com
TITLE: uDL1 Configuration and Operation Guide
DOCUMENT NO.:
SHEET:
UDL1-MAN-001
REV:
24 of 26
1.07
Advertisement
Table of Contents
