Advertisement
PART 4 Use & Care
OPERATING CONTROLS:
1. Always activate the ventilator whenever using cooking appliances.
2. Activate the ventilator a few minutes before starting to cook to establish an
airflow pattern within the room.
3. Adjust the fan speed according to the amount of cooking exhaust.
4. Adjust the dimmable halogen lights as desired.
5. Eliminate air currents in the hood vicinity by shutting nearby windows and
doors, turning off ceiling fans and closing the adjacent heating and air con-
ditioning outlets.
6. Place your largest pans, skillets and stock pots on the rear burners
whenever possible.
WARNING: DO NOT operate the vent system without the filters in place, or with
dirty, grease laden filters.
ENERGY SAVING TIPS:
1. Do not operate the blower at a speed that is higher than necessary to
remove the cooking exhaust. Running at excessive speeds removes more
air from the inside of the house that must be replaced by outside air. This
may be especially costly when your home's heating or air conditioning sys-
tem is in operation. Turn off the unit once the smoke and cooking odors
have been eliminated.
2. Clean filters and grease laden surfaces often to improve efficiency.
3. Always use lids on cookware to retain heat and moisture.
4. Minimize the amount of liquid used to cook food.
5. Select cookware of proper size, material and construction for the cooking
task being performed.
FIVE YEAR WARRANTY
DURING ENTIRE WARRANTY PERIOD:
FANTECH, INC. will repair or replace any product which has a factory
defect in workmanship or material. Product may need to be returned
to the FANTECH factory, together with a copy of the bill of sale and
identified with RMA number.
THE FOLLOWING WARRANTIES DO NOT APPLY:
• Damages from shipping, either concealed or visible.
Claim must be filed with freight company.
• Damages resulting from improper wiring or installation.
• Damages or failure caused by acts of God, or resulting from
improper consumer procedures, such as:
United States
1712 Northgate Blvd. • Sarasota, FL 34234
(T) 1.800.747.1762 • (F) 1.800.487.9915
(T) 1.941.309.6000 • (F) 1.941.309.6099
web: www.fantech.net • email: info@fantech.net
CARE & CLEANING:
REPLACING LIGHT BULBS: Par 20 halogen lamps are available in many different styles
and sizes. Following is a list recommended by the manufacturer:
REPLACEMENT FILTERS: Order online at www.fantech.net
1. Improper maintenance
2. Misuse, abuse, abnormal use, or accident, and
3. Incorrect electrical voltage or current.
• Removal or any alteration made on the FANTECH label control
number or date of manufacture.
• Any other warranty, expressed, implied or written, and to any
consequential or incidental damages, loss or property, revenues, or
profit, or costs of removal, installation or reinstallation, for any breach
of warranty.
WARRANTY VALIDATION
• The user must keep a copy of the bill of sale to verify purchase date.
• These warranties give you specific legal rights, and are subject to
any applicable consumer protection legislation. You may have addi-
tional rights which vary from state to state.
Canada
50 Kanalflakt Way, Bouctouche, NB E4S 3M5
(T) 1.800.565.3548 • (F) 1.800.747.8116
(T) 1.506.743.9500 • (F) 1.506.743.9600
web: www.fantech.ca • email: info@fantech.ca
1. Proper cleaning is necessary to maintain performance and appearance,
while also ensuring safe operation. The frequency of cleaning should be
adjusted according to the type and amount of cooking. Best results will be
achieved by cleaning soiled components as soon as possible.
2. Filters must be cleaned regularly.
SHL Series: Remove one filter at a time, grasp the filter handle and gently
pull toward you, then down and back. Filter should be installed with the
handle in the rear filter slot.
SGHL Series: Remove one filter at a time. Insert a blunt knife into the
small slot in the front edge of the filter. Push down and back. Filter should
be installed with small slot at the front of the filter.
3. The filters may be cleaned by hand washing in hot water using a mild deter-
gent solution, or by placing them in the top rack of an automatic dishwash-
er. Dry the filters completely before using again.
4. Stainless steel surfaces should be cleaned with a solution of mild detergent
and warm water. Rinse and dry with a soft lint-free cloth.
CAUTION: Do not use any type of pad that will scratch the liner
5. CAUTION: If a commercially available stainless steel cleaner is used. It is
important to read the labels for chlorine compounds. Chlorine is
a corrosive substance. If these compounds are present, rinse
thoroughly and dry with a soft lint-free cloth. Follow polish man-
ufacturer's instructions.
6. Always wipe stainless steel surfaces with the grain. Never wipe across
the grain.
7. After cleaning, reinstall the filters carefully.
• Philips MASTER Line 50 watts 120V
• Felt Electric 50 watt 130V
• Industrial Grade Premium QualityTM P.Q.L. Incorporated Code 83009
Article #: 301032 Rev Date: 022207
Advertisement
