FCC PART 15, SUBPART C, SEC. 15.247 - DIRECT SEQUENCE SPREAD SPECTRUM TRANSMITTERS
PCMCIA Wireless LAN Card, Model WL-211F
EXHIBIT 2.
INTRODUCTION
2.1.
SCOPE
Reference:
Title
Purpose of Test:
Test Procedures
Environmental
Classification:
2.2.
RELATED SUBMITAL(S)/GRANT(S)
None
2.3.
NORMATIVE REFERENCES
Publication
YEAR
FCC CFR Parts
1998
0-19
ANSI C63.4
1992
CISPR 22 &
1997
EN 55022
1998
CISPR 16-1
ULTRATECH GROUP OF LABS
3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4
Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vhk.ultratech@sympatico.ca, Website: http://www.ultratech-labs.com
•
Assessed by ITI (UK) Competent Body, NVLAP (USA) Accreditation Body & ACA/AUSTEL (Australia)
•
Accredited by Industry Canada (Canada) under ACC-LAB (Europe/Canada MRA)
•
Recognized/Listed by FCC (USA )
•
All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST)
FCC Part 15, Subpart C, Section 15.247:1998
Telecommunication - Code of Federal Regulations, CFR 47, Part 15
To gain FCC Certification Authorization for Direct Sequence Spread Spectrum
Transmitters operating in the Frequency Band 2412 - 2462 MHz .
Both conducted and radiated emissions measurements were conducted in accordance
with American National Standards Institute ANSI C63.4 - American National Standard
for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical
and Electronic Equipment in the Range of 9 kHz to 40 GHz.
•
Residential
•
Light-industry, Commercial
•
Industry
Title
Code of Federal Regulations – Telecommunication
American National Standard for Methods of Measurement of Radio-Noise Emissions
from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40
GHz
Limits and Methods of Measurements of Radio Disturbance Characteristics of
Information Technology Equipment
Specification for Radio Disturbance and Immunity measuring apparatus and methods
Page 5
FCC ID: MXF-WL211F
File #: GTT-013FTX
March 17, 2000