Personal Priority Display Technical Specifications; Emi Compliance - Adaptive Micro Systems ALPHA User Manual

Personal Priority Display
Personal Priority Display technical specifications
Item
Environmental requirements:

EMI compliance

While this device is a verified Class A device, it has been shown to meet the
Class B limits.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Changes or modifications made to the Personal Priority Display that have
not been expressly approved by Adaptive Micro Systems, Inc. could void your
authority to operate the Personal Priority Display.
2
Display: 1 lb 5 oz (595.35 grams)
Weight:
Power supply: 1 lb 3 oz (538.65 grams)
Height: 3.5 in (8.89 cm)
Length: 13.7 in (34.80 cm)
Depth: 1.84 in (4.67 cm)
Input voltage: 9.0 VDC, 1.5 amp
Power supply: 120 VAC 60 Hz or 230 VAC 50 Hz
The Personal Priority Display is for indoor use only. The display
should be operated in an environment where the temperature
is between 0 - 50 ° C, and the humidity (non-condensing)
does not exceed 95%.
Description and installation: Personal Priority Display technical specifications
Description