Setting The Sign's Serial Address - Adaptive Micro Systems ALPHA User Manual

Setting the sign's serial address

The serial address is a number from 0 to 99 assigned to a sign. This number
permits you to send messages to an individual sign in a network of signs.
Ordinarily, messages are broadcast to all signs on a network, but when you give a
sign a unique address, messages can be directed to specific signs.
See the document Network Configurations (part number 9708-8046) for
more detailed information.
You can set the serial address by using either the Remote Control or the
and keys:
Using the
When you do this...
and at the same time
Press until SET SERIAL (A) appears.
Press .
Press to change the first digit (or
the second digit).
Press to change the second digit.
for Next .
Press
and at the same time
Press to resume normal sign operation.
Basic sign operation: Setting the sign's serial address
and keys to set a serial address
to select
Personal Priority Display
You see this...
BUTTON MENU
RESUME (A)
SET SERIAL (A)
00
A Next, B Change
00
A Next, B Change
00
A Next, B Change
00
SET SERIAL (A)
00
BUTTON MENU
RESUME (A)
7