Pioneer DDJ-RB Service Manual page 26

1
TYPE A (* 1)
A
The position (min. to max.) of the knob will be displayed using the following 4 LEDs: HOT CUE/PAD FX1/SLICER/SAMPLER.
Starting from left, LEDs will light up according to the position of the knob right after each knob is rotated.
B
TYPE B (* 2)
The position of the rotary encoder will be displayed using the following 8 LEDs.
C
TYPE C (* 3)
The position of the of the knob/fader will be displayed using the following 5 LEDs for each CH according to the move.
The LEDs will light up according to the position of the knob/fader right after each knob is rotated/fader is moved.
D
TYPE D (* 4)
E
The position of the knob/fader will be displayed using the following LEDs for both CHs according to the move.
The LEDs will light up according to the position of the knob/fader right after each knob is rotated/fader is moved.
* CROSS FADER: No LED will light up when it is in far right; All LEDs will light up when it is in far left.
F
26
1
2
DDJ-RB
2
3
3
4
4