Nokia A040 Getting Started page 24

Testing on a non-TCP/IP network
24
Under Windows 2000/NT
1 Open a DOS prompt.
2 Enter
ipconfig /release
This will release the old address.
3 Enter
ipconfig /renew
address.
You should now be able to access the Access
Point from your client machine.
If you do not use TCP/IP you can still follow
the instructions in Using the adapter in a TCP/
IP environment. When the A040/A041 stops
beeping, indicating a connection has been
made to the Access Point, you can try
transferring a file between Computer A and
Computer B in order to verify that the system is
operating.
to renew the
A040/A041 Getting Started