Reset Button - Nokia A040 Getting Started

Reset button

Overview
New configuration applied
If you alter and save any configuration
settings:
1 The LED flashes red and green.
power
2 The adapter emits a three-tone chirp.
Set-up mode entered
If you put the adapter into set-up mode (see the
Advanced User Guide, supplied as an Acrobat
PDF file on the CD-ROM):
1 All the LEDs come on, then go out again.
2 The unit makes an intermittent beeping
sound.
3 Note that the
flash (as the adapter is not attempting to
connect to an Access Point).
The adapter has a reset button hidden on its
underside:
You use this to put the unit into set-up mode
(see the Advanced User Guide, supplied as an
Acrobat PDF file on the CD-ROM).
and LEDs do not
notify radio
rubber
feet
reset
button
13