Nokia A040 Getting Started page 12

Special LED/sound sequences
12
The A040/A041 also has an internal speaker. It
emits sounds in conjunction with special LED
sequences:
Power-on
At power-on, the following things happen:
1 The A040/A041 emits a three-tone chirp.
2 The LED lights (assuming there is a
LAN
LAN connection).
3 The and
notify
the adapter beeps for up to 10 seconds while
the adapter scans for an Access Point.
4 If a connection is made to an Access Point,
the adapter emits a three-tone chirp, the
LED goes out and the
notify
on.
If the adapter fails to connect to an Access
Point, the beeps stop but the
LEDs continue to flash together.
Access Point connection lost
If the connection with an Access Point is lost
for any reason:
1 The and
notify
(they keep flashing until a connection is
regained).
2 The adapter emits beeps for five seconds.
Access Point connection regained
If the connection with an Access Point is
regained:
1 The and
notify
2 The adapter emits a three-tone chirp.
3 The radio LED stays on solid if there is no
activity, or flashes intermittently if there is.
LEDs flash together and
radio
radio
notify
LEDs flash together
radio
LEDs stop flashing.
radio
A040/A041 Getting Started
LED stays
and
radio