GE Mini Field Agent Instructions For Installation And Configuration page 19

2094532-001 D 02 2018
3. Network
Select
4. Network Config.
Select
5.
In the Network Config. menu, select
6.
Set Port 2 to
Note Ensure that Port 2 is connected to the Facility network switch,
using an ethernet cable.
7.
From the right pane of the window, select the
be configured.
Note Ensure that an already configured device is not selected.
8.
Set the selected device to
9.
Set the Display Name to
Enter
10. Select
11. Set the Network ID Method to
following figure:
and set Network Status to
from the right-side button bar.
Enable
.
Enable
.
CS Insights
Previous Page
and then select
IP Address
Enable
.
Port 2
.
Port2 Device
.
.
as shown in the
to
19