Rebooting Mini Field Agent - GE Mini Field Agent Instructions For Installation And Configuration

Rebooting Mini Field Agent

2094532-001 D 02 2018
2. Right-click on "resolv.conf" file and select Edit.
3. If DNS Server is not used in the facility (See DNS Server IP
Address in "Facility information"), verify that the content of this
file matches with the content as shown in the below screenshot
else update to match.
4. If DNS Server is used in the facility (See DNS Server IP Address
in "Facility information"), enter DNS server IP address in
"nameserver
file as shown in the below screenshot.
Note If there are more than one DNS server for a facility, repeat this
step for all the DNS Server IP addresses.
5. Save and close the "resolv.conf" file.
To reboot the Mini Field Agent, perform the following steps:
1.
While in WinSCP, press
2. In the Enter command field, enter:
• reboot
3. Execute
Click
An error dialog box appears. Please wait for the connection to
re-establish.
<DNS server IP address>
Ctrl+T
.
.
" at the bottom of the
15