General Safety Warnings; General Safety Information - Univex Upasta-01 Operating And Maintenance Manual

General safety warnings

All operations performed on the machine, from its use to maintenance to its final demolition, require the presence of suitably qualified
staff, in order to limit risks due to inadequate qualification to a minimum.

General safety information

The manufacturer has designed and checked every machine part and their respective function in the minutest detail, to prevent
potential hazards.
Nonetheless, given the specific functional features of the machine, below are certain warnings to bear in mind. The conditions that we
draw attention to are:
THE OPERATOR MUST WEAR CLOTHING AND CARRY PERSONAL BELONGINGS THAT ARE COMPLIANT WITH
LEGAL REQUIREMENTS TO ENSURE MACHINE OPERATIONS CAN BE SAFELY CONDUCTED.
BELONGINGS WORN BY THE OPERATOR MUST ONLY BE THOSE THAT ARE INDISPENSABLE AND MUST BE
WORN PROPERLY AND STABLY, IN ORDER NOT TO CREATE POTENTIAL HAZARDS OR DANGER FOR THE
OPERATOR OR OTHER STAFF ASSIGNED TO THE MACHINE.
DO NOT STICK PROPERTY OR BODY PARTS INSIDE THE MACHINE.
WHEN OPERATING THE MACHINE, THE OPERATOR OR USER MUST APPLY ALL SAFETY STANDARDS
REQUIRED BY THE LAWS APPLICABLE IN THE COUNTRY WHERE THE MACHINE IS INSTALLED.
CLEAN THE CONNECTORS AND CABLES WITH COMPRESSED AIR OR USE A DRY CLOTH, IF NECESSARY.
Furthermore, the user must comply with the following bans over the machine's entire lifespan:
• It is forbidden to open machine guards during its operation.
• It is forbidden to deactivate the safety devices.
• It is forbidden to inspect the machine during its operation.
• It is forbidden to lean on the machine during its operation.
• It is forbidden to sit on top of machine components.
• It is forbidden to use the machine, even only parts of it, for other purposes than those listed in this Manual.
• After cleaning or servicing the machine, reassemble the machine guards as soon as possible.
• It is forbidden to apply other safety devices on the machine unless the manufacturer first grants authorization in writing.
• It is forbidden to use the machine with safety devices or elements other than those recommended by the manufacturer unless the
manufacturer first grants authorization in writing.
• Only use the machine with original accessories
• Clean the machine components, panels and controls, with soft cloth and dry.
• It is forbidden to use any type of solvent, like alcohol or gasoline or thinners, to clean any of the surfaces.
• Do not stick your hands, arms or any other body part into or near moving machine parts.
• When inspecting or removing any type of fault and malfunction, be sure to apply all the precautions described in this Manual that are
effective in preventing any harm to persons and/or animals and/or property.
• Clothing worn by the operator must be the most appropriate, that is to say, not too loose or too close-fitting, and not have flapping
hems and edges.
• Do not wear belts, rings, bracelets and chains. Bundle long hair in a head bayonet.
FAILURE TO COMPLY WITH THE ABOVE BANS AUTOMATICALLY IMPLIES THE CANCELLATION OF ANY
WARRANTY COVER AND EXEMPTS THE MANUFACTURER OF ALL LIABILITY.
WHEN OPERATING THE MACHINE, THE OPERATOR OR USER MUST APPLY ALL SAFETY STANDARDS
REQUIRED BY THE LAWS APPLICABLE IN THE COUNTRY WHERE THE MACHINE IS INSTALLED.
4