USP Duramax Owner's Manual page 31

65
. Place the Wall Panel (WP4A) on the back base
bar. Line up the holes with base bar. Secure the Panel
at bottom with (S1) screws to the base bar from out
side.
First fix the middle screws then
Tip
go to the edges.
S1
66
. Insert the Ventilation Blocking Cover (VBCF) in
between the top angle and the wall panel. Line up the
holes with the top angle & secure with (S1) screws.
S1
67
. Fix the Column fitting with Column to the back
base bar with (S1) screws.
CFP
S1
27
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
VBCF
COLP
WP4A