Beurer FT 100 Instructions For Use Manual page 44

The acoustic signal symbol flashes on the display
(Fig. 7).
You can activate/deactivate the acoustic signals (de-
vice activation, measurement in progress, measure-
ment completion).
• To activate the acoustic signals, use the MODE/
MEM button to select
LIGHT/SET button.
• To deactivate the acoustic signals, use the MODE/
MEM button to select
LIGHT/SET button.
The illuminated display symbol flashes on the dis-
play (Fig. 8).
You can activate or deactivate the automatic illumi-
nated display (appears following forehead tempera-
ture measurement).
• To activate the automatic illuminated display, use
the MODE/MEM button to select
with the LIGHT/SET button.
• To deactivate the automatic illuminated display,
use the MODE/MEM button to select
confirm with the LIGHT/SET button.
, and confirm with the
, and confirm with the
, and confirm
, and
44
Fig. 7
Fig. 8