GE 27730 User Manual page 9

Allow the phone to charge for
12 hours before using the first
time. If you don't charge the
phone properly (for 12 hours)
when you first set up the
phone, perfomance of the
battery will be compromised.
5. After charging, remove and
reattach the mounting bracket by
inserting the two tabs at the top
and then snapping the tab at the
bottom into place.
6. Plug the telephone line cord into
the phone jack on the back of the
unit and then into the wall phone
jack.
7. Slip the mounting holes over the
wall plate posts and slide the unit
down firmly into place. (Wall
plate not included.)
8. Press the PWR button on the
handset. Search is displayed.
When Ready is displayed the
phone is ready for use.
NOTE : The phone automatically defaults to touch-tone dialing. To change to
pulse (rotary) dialing, see "Tone/Pulse Dialing." If you don't know which type
of service you have, check with the phone company.
CAUTION: Use only the Thomson 5-2470 power supply that came with this unit.
Using other power supplies may damage the unit.
6
5
7
9