Error Codes - Apache Manitou MX User Manual

Error codes

Code Problem cause
07 Protection from battery overvoltage (check the battery voltage).
08 Error of motor hall sensor (check the settings and connections with the motor).
09 Error of motor phase cable (check the settings and connections with the motor).
11 Error of unit control temperature sensor (check the settings and connections with the control unit).
12 Error of torque moment sensor (check the settings and connections with the motor).
13 Overheated battery (switch off the system and wait).
14 Overheated motor (switch off the system and wait).
21 Error of speed sensor (check the settings and connections with the motor).
22 Error of BMS interface (replace the battery).
30 Communication error (check connections of all connectors).
Should any of these errors remain or another error than defined appears contact your dealer.
LCD COMPACT
(Matto E7, Matto E7 Lady, Gaagii, Gaagii Lady)
battery status
speed
Switching on - off
Switch on the electric system supply to the battery
1
Activate the battery by pressing the button on its body.
Switch on the LCD panel of eBike
2
Press the button
Use the same method to switch off the electric system. To switch off the frame battery press the button for
period of 4 seconds. Due to energy saving switches the system off automatically after 10 minutes of inactivity.
- EBIKE CONTROL
and hold it for period of 2 seconds.
lights
power scale
assistence level
speed / distance mode
speed units
9