Apache Manitou MX User Manual page 10

Assistance level setting
To change the assistance level in the range 0-5 shortly press button
level 0 is without the motor assistance.
In case of riding at low revolutions and high assistance mode the motor can vibrate for a brief
moment. In such case we recommend immediately reducing the assistance level.
Walking assistance
To activate the walking assistant press shortly and hold button
simplifies to handle the eBike, usually during walk along the eBike. EBike moves along in such a case by
speed around 4 to 6 km/h. The walking assistance is deactivated as soon as the button is released.
CAUTION: After activating the walking assistant do not try to prevent the bike to move.
It can cause motor damage.
Change of riding data display
To change displayed informations press shortly of button
Informations are displayed in the sequence below:
TRIP
Trip distance
*riding time (automatic start/stop)
Temporary data deleting
Temporary data (TRIP, MAX, AVG, TIME) is possible to delete by pressing and holding button
Select option „YES" and confirm by pressing button
Parameters settings
The parameters setting mode is activated by pressing button
Set Unit – units setting (km/miles)
Set wheel – setting of the wheel diameter in cm
Set Backlight – background light display setting within 1-3
Service – service setting (only for service technicians, to access pin code required)
Switching on display background light
To activate the display background light press and hold button
10
ODO
Total distance
on the control display. This function
.
TIME AVG
Time* Average speed
.
and
for 1 second.
. The highest assistance level is 5,
MAX
Maximum speed
and holding it for 2 seconds.
and .