Table of Contents
Advertisement
REPEAT PLAY
During normal
play
1.
Press [REPEAT] before pressing [PLAY/PAUSE]
or during the play mode. [REPEATl will light, and all
of the tracks on the disc will be played repeatedly,
2.
To cancel the repeat play, press [REPEAT] again, [REPEAT] will go off.
NOTE:
If [STOP/CLEAR]
is pressed, repeat play will be canceled,
During programmed
play
Press [REPEAT] before pressing [PLAY/PAUSE]
or during programmed
play, [REPEATl will light and all
of the programmed
tracks will be played repeatedly.
One track repeat play
1.
Program a track desired
2,
Press [REPEAT].
3,
Press [PLAY/PAUSE].
IMPORTANT
NOTE
If an abnormal display or an operating problem occurs, disconnected
the mains lead and remove all
batteries,Wait
at least 90 seconds, then reconnected
the mains lead and reinstall the batteries.
CASSETTE
TAPE OPERATION
HELPFUL
HINTS
Preventing
Accidental
Erasure (Fig. 6)
Whenever a recording is made, the sound previously recorded is erased automatically.
To protect valw
able recordings from accidental
erasure, the unit and cassette are equipped with standard safety fea-
tures. To keep the recorded material permanently,
break out the tab on the back of the cassette with a
screwdriver. To protect side A (1) from accidental erasure, break out right side tab (2). To protect side B
from accidental erasure, break out the left side tab, To record on a cassette from which the tab has been
removed, simply attach adhesive tape (3) over the tab opening.
NOTE:
[REC] cannot be pressed when the cassette tab is removed,
PREPARATION
FOR PLAYBACK
AND RECORDING
NOTE:
Do not use the endless tape.
-
Use the normal tape (TYPE 1)
Pause
Press [PAUSE] to temporarily
stop the tape during playback or recording. Press it again to continue
Fast Forward
and Rewind
To fast wind or rewind the tape, press [REW/FFWD].
Press [STOP/EJECT]
when the desired section of
the tape is reached. When the end of the tape has been reached, [REW/FFWD]
will release automati-
cally y.
Full automatic
stop
This unit has a full-release
stop system, to protect the tape and prevent pinch roller damage. When the
end of the tape is reached in Playback,
Recording,
Fast forward or Rewind, the tape mechanism
will
automatically
stop.
-8-
Advertisement
Table of Contents
