Sanyo MCD-Z160F Instruction Manual page 8

Track search
1. In the play mode, press and hold down [ F-I SKIP/SEARCH] or [SKIP/SEARCH K< ] to lower the
volume level and quickly advance or return to any part of the disc. The number will flash.
2. Release [FM SKIP/SEARCH] or [SKIP/SEARCH l<+] to return the volume to normal level and
resume play. The number will remain on.
NOTE:
If [ FI SKIP/SEARCH] is pressed during the pause mode, no sound will be head, and the pause
mode will continute when the button is released.
Track skip
1. Press and release [ F>I SKIP/SEARCH] or [SKIP/SEARCH 14<] repeatedly during play to quickly
locate the beginning of a track.
2, [CD TRACK NO.] will show the number of the selected track. Play will continue from the beginning of
the new track.
NOTE:
If [ El SKIP/SEARCH] or [SKIP/SEARCH H< ] is pressed when the unit is pause mode, when the
button is released, th unit will remain in the pause mode.
PROGRAMMED PLAY
With programmed play, up to 16 tracks on a disc can be memorized and played in any order. [CD TRACK
NO,] will show the track number 1-19.
In this example, tracks 1-8 on a 10-track disc are entered into the unit's program memory, for play in the
order shown in Fig. 5.
EXamDk
m'oaram
1.
2,
3.
4,
5.
6.
7.
8.
9.
P;ess [S~OP/CLEAR].
Press [ ›~ SKIP/SEARCH] repeatedly unitl [ CD TRACK NO.]show "5", The number will flash.
Press [MEMORY]. The number will remain on.[MEMORY] will lights.
Press [SKIP/SEARCH K+] repeatedly unitl [CD TRACK NO.] show "3, The number will flash.
Press [MEMORY]. The number will remain on.
Repeat steps 2-3 to memorize tracks 1, 8, 2, 7, 6, 1 and 4.
NOTE:
A track number can be entered more than once.
Checking the program
After the last track number has been entered, press [MEMORY] to view the memorized track num-
bers, in the order they were entered and last display will display "0.
Press [PLAY/PAUSE]. Programmed play will begin with the first programmed track.
When the last programmed tracks has finished playing, the CD player will stop, unless [REPEAT] has
been pressed (see REPEAT PLAY).
NOTE:
If you want to add a program number, select the track number, and press [MEMORY]. It is not pos-
sible to change a programmed entry, or to add an entry between the programmed selections.
Ending programmed play
Press [STOP/CLEAR] twice (during programmed play), or once (during the stop mode), to clear the
program memory.
-7-