G SERIES PILOT'S GUIDE
.
Configuring the Fuel System Type:
Line 6 of the Engine Configuration screen is the Fuel parameter that defines the fuel system configuration.
There are three choices INJECTED, CARB or PCARB. The bottom knob is turned to make a selection on this line.
For example to set the G2-3-4 up for a pressurized carburetor with a separate return line perform the following procedure:
When on line 6 turn the SEL knob clockwise or counter clockwise to select PCARB. The current selection is shown in red.
Use the SEL pushbutton to select Line 9. On line 9 turn the SEL knob clockwise or counter clockwise to set the Save Config
parameter to select YES.
Press the SEL button to save your changes into permanent memory.
INSIGHT
INSTRUMENT CORPORATION
BOX 122, FORT ERIE, ONTARIO, L2A 5M6
42