Page 1
G2 Quick Start Guide In 4 Easy Steps To Start With: What is everything on the G2 screen? The instrument has two control knobs that operate combination rotary and push button switches. The top knob in general controls screen selection while the bottom knob controls items within the given screen.
Page 2
If you need to increase the EGT bar height, for better visablity. Push SEL and by turning SEL knob (This is preset from factory) Second push you can set target threshold for leaning by turning SEL knob. (Preset at Insight at 50 Push again to save and yellow screen will disapear.
Page 3
Step 3 Set FUEL ONBOARD page Step C Step B Step A Set total fuel onboard before take-off, you turn to the FUEL ONBOARD page. A- INITIIAL FUEL will be hightlighted in YELLOW A- Turn SEL knob to set gallons B- Push SEL knob again to highlight SAVE &...