G4 Series Introduction - INSIGHT G SERIES Pilot's Manual

G SERIES PILOT'S GUIDE .

G4 Series Introduction

Insight Instrument Corporation has developed a slightly bigger derivative of the G3 called the G4.
This derivate, P/N 1200C-001, designated as G4 model, will replace Insight's earlier twin-engine GEMINI 1200
instruments. The G4 can be configured as a single (G4-001) or twin-engine (G4-002) instrument. Its function list
matches the approved model G3 functions.
The G4 single/twin-engine display functionality is possible by using a slightly bigger LCD and housing.
The G4 utilizes the same technology for housing, bezel, circuit boards, connectors, display and electronic components
(including circuit protection devices) as the already approved G3. Its PCB is populated slightly more to accommodate
additional temperature sensors.
The G3 software was designed so that it can be configured for either single or twin-engine installations.
Therefore, the G4 software is unchanged. The only minor modification was required for a different LCD driver.
The G4 environmental qualification consisted of a subset of DO-160 testing (Temperature/Altitude, Temperature Variation,
Vibration), as most of the G3 test results are applicable to G4 by similarity.
NOTE: All pages and function on G4 are the same as G3
INSIGHT INSTRUMENT CORPORATION BOX 122, FORT ERIE, ONTARIO, L2A 5M6
13