Sensor Setup ......6 FCC Information ....14 Display Setup ......7 Customer Support ....15 Set the Time, Date and Units ..8 Backlight Settings ....8 Warranty......15 Questions? Contact Customer Support at www.AcuRite.com/support or email support@chaney-inst.com SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Page 3
Enter all required location info. When prompted for “Station Hardware”, select “AcuRite Pro Weather Center”. You will be provided with a WU Station ID and Station Key once you have submitted all required info (record for step 5, below).
Page 4
Features and Benefits BACK OF DISPLAY 1. Integrated Hang Hole 6. A-B-C Switch For easy wall mounting. ID code that must match sensor’s A-B-C switch to ensure units 2. Fold-out Tabletop Stand synchronize. 3. Power Adapter 7. Backup Battery Compartment 4.
Page 6
1. Current Outdoor Temperature 14. Current Indoor Humidity Arrow icon indicates the direction Arrow icon indicates direction temperature is trending. humidity is trending. 2. Chance of Rain Indicator 15. Clock Indicates the likelihood of rain when 16. Display Low Battery Indicator connected to Wi-Fi.
Follow the polarity Install or Replace Batteries (+/-) diagram in the battery AcuRite recommends high quality compartment. alkaline batteries in the outdoor 3. Replace the battery cover. sensor for the best product performance. Heavy duty or rechargeable batteries are not recommended.
Display Setup Set the A-B-C Switch 2. Insert 3 x AAA alkaline batteries into the battery Locate the A-B-C switch inside compartment, as shown. Follow the battery compartment. Set the polarity (+/–) diagram in the A-B-C switch to A, B or C. the battery compartment.
Set the Time, Date and Units Press and release the “ ” button, located on the front of the display, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “ “...
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display and outdoor sensor are critical to the accuracy and performance of this product. Display Placement Place the display in a dry area free of dirt and dust. Display stands upright for tabletop use and is wall-mountable.
CLOUDY STORMY SNOW RAIN / SNOW View the complete list of icons at www.AcuRite.com/acurite-icons High and Low Records High and low records for today and all-time are displayed for indoor and outdoor temperature and humidity. Today’s records automatically clear at 12:00am midnight every day.
Page 12
• Reset the display by pressing the reset button, located not working on the back of the display. Date and time will need to be entered after a reset. If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com/support or email support@chaney-inst.com for assistance.
Page 13
Problem Possible Solution • Your internet router and display must be within range of each other. Relocate your display closer to your router. • Ensure the network name (SSID) and password you've entered are correct. NOTE: Both network name and password are case sensitive.
Specifications Outdoor: -40ºF to 158ºF; -40ºC to 70ºC TEMPERATURE RANGE Indoor: 32ºF to 122ºF ; 0ºC to 50ºC Outdoor: 1% to 99% RH HUMIDITY RANGE Indoor: 1% to 99% RH 330 ft / 100 m depending on home construction materials WIRELESS RANGE 433 MHz OPERATING FREQUENCY...
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: support@chaney-inst.com AcuRite Visit us at www.