Usage; Starting Up Idc; Switching Control Between Attendant And Occupant; Setting The Speed - Invacare LiNX IDC User Manual

5 Usage

5.1 Starting up IDC

1. Connect IDC.
2. Power up power wheelchair.
3. If flash code appears, restart.
4. If flash code stays, check flash code.
If necessary, make firmware update of power
wheelchair, install latest drive program, read error
via LiNX Access iOS tool or PC tool.
1643411-A
5.2 Switching control between attendant and
occupant
The remote that powers up the mobility device is in control
of the wheelchair.
Pressing the power button on a remote not in control
returns control from attendant to occupant and vice versa,
unless other settings have been made.

5.3 Setting the speed

The maximum speed of the wheelchair can be set by the
user to match his personal requirements and the surrounding
conditions. The current maximum speed set is displayed
on the wheelchair speed display A and can also be preset
there. You can carry out further fine adjustments to the
maximum speed on the IDC using the speed potentiometer.
1. Set maximum speed with speed potentiometer A.
2. Pull trigger lever to start driving.
The more you pull, the faster the wheelchair drives until
it reaches maximum speed.
Usage
11