Polaroid PS220 Instruction Manual page 9

Your mobile outlet to go, mobile energy storage
Table of Contents

Advertisement

Instruction manual | PS220 Mobile Energy Storage
Caution
If rust, peculiar odors, overheating or other abnormal circumstances are observed, stop using the unit immedi-
ately and contact the dealer or our customer service center.
Make sure that the label is always clean and legible and do not remove it.
The unit complies with all legal requirements for transport of dangerous goods.
The capacity of the lithium polymer battery in the unit exceeds 100 Wh.
Based on UN standards: If this unit is to be sent by airplane or ship, it must be transported in accordance with
IATA standard packaging. IATA instructions and and labelling requirements and the relevant declarations must
be completed.
Make sure that the unit is properly secured when transporting in a motor vehicle.
Failure to do so may result in damage to the unit, electric shock, overheating, fire and other accidents.
The unit must be connected to a grounding cable when charging the battery.
Charging should be performed via the supplied AC power cord, which is plugged into a grounded wall socket.
Do NOT allow the unit or grounding cable to become wet by water or other fluids.
Doing so may result in short circuiting, overheating, fire, etc.
Only charge, use and store the unit within an ambient temperature of 0 to 45 °C.
Operating the unit above or below this temperature range may result in overheating or reduced performance.
Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibrations.
To prevent accidents, please contact the dealer or our customer service center to have the unit checked and
repaired.
Carefully read the instructions for the electric devices that you intend to connect to your power
supply unit.
Make sure that the device is switched off before you connect it.
A device starting up suddenly may lead to accidents or injuries.
If the protective function is activated and the output of the device is switched off, disconnect the electric de-
vices from the power output. Switch the unit off in case of non-use/storage in order to prevent electric shock
and the battery from discharging unnecessarily, etc.
9

Advertisement

Table of Contents
loading

Table of Contents