CONTENTS Introduction Box Contents Operating Instructions Product Features Safety Instructions Technical Specifications How To Use Cleaning How To Create Your Own Candy Candy Cartridge Refills Stencil Library Manufacturer’s Guarantee Certifications and Compliance FAQs and Troubleshooting...
Candy Cartridge Refills, Strawberry, Grape, Lemon, Apple, Orange and Cola. The Polaroid 3D team hope that you have many happy hours drawing, and creating with your Polaroid CandyPlay 3D Pen and enjoy eating your yummy homemade candies! If you have any questions or queries to do with your pen, please don’t hesitate to contact...
BOX CONTENTS 1 x Polaroid CandyPlay 3D Pen and Holder 4 x Candy Cartridges (Strawberry Flavour) 1 x Finishing Cartridge 1 x 1.5m / 4.9ft USB C Power Cable (USB Power Adapter not included) 1 x Quick Start Guide...
OPERATING INSTRUCTIONS USB Cable Entry Point Power/ LED Indicator Retraction A 5.0 Volt DC, 2 Amp (minimum) Light Button power adapter (5.0VDC 2.0A) Press the ‘Power/ Red light indicates the MUST be used. Retraction Button’ to turn pen is heating up. the pen on and off.
• Manual or Automatic extrusion. • Works with the Polaroid Candy Cartridges, available in 6 fantastic sugar-free colours and • flavours: Strawberry, Orange, Lemon, Apple, Grape and Cola. 4 FREE Strawberry flavour Candy Cartridges included with your CandyPlay 3D Pen.
Pen Size 195 (l) x 37 (w) x 29 (d) mm 7.67 (l) x 1.45 (w) x 1.14 (d) inch Refills Polaroid Candy Cartridges (3D-FL-PL-2505-00, 3D-FL-PL-2506-00, 3D-FL-PL-2507-00, 3D-FL-PL-2508-00, 3D-FL-PL-2509-00, 3D-FL-PL-2510-00, 3D-FL-PL-2504-00). USB Cable Type-C to USB-A 1.5m / 4.9ft Guarantee 12 Month Manufacturer’s Guarantee (this may differ by state/...
2.0A). 2. Press the Power button ( ). The LED Indicator light will show red to indicate that the Polaroid CandyPlay 3D Pen is heating up. 3. Once the LED Indicator light turns blue, the 3D pen is heated to the correct temperature and is ready to use.
The Polaroid CandyPlay 3D Pen MUST be cleaned thoroughly before the first use and again after every use. Note: Before taking the Polaroid CandyPlay 3D Pen apart, leave it for at least 10 minutes to completely cool, after it has been turned off.
Page 10
3. Ensure all parts are completely dry before reassembling the pen. Reassembling the Polaroid CandyPlay 3D Pen To reassemble the pen, follow the 6 steps from ‘Taking apart the Polaroid CandyPlay 3D pen for cleaning’ but in reverse order. Note: Before inserting a Candy Cartridge, press and hold the Retraction button for 2 seconds.
HOW TO CREATE YOUR OWN CANDY You don’t need to be an experienced sweet maker to start creating your own unique Candy! Simply follow the steps below to create tasty, stunning creations that will wow family, friends and colleagues! For best results, draw directly onto grease proof paper or baking/parchment paper. Starting Out Using a template design (please visit polaroid3d.com/candy-play-pen-stencils for a...
CANDY CARTRIDGE REFILLS The Polaroid CandyPlay 3D Pen is compatible with the Polaroid Candy Cartridges, available in 6 vibrantly coloured tasty flavours including Pink Strawberry flavour, Yellow Lemon flavour, Orange Orange flavour, Purple Grape flavour, Green Apple flavour and Brown Cola flavour.
Page 13
CANDY CARTRIDGE REFILLS 3D-FL-PL-2507-00 40 x Lemon flavour Candy Cartridges (Yellow) Ingredients: Isomalt, Aspartame (E951), Natural flavourings with other natural flavourings, Beta-carotene (E160a). 3D-FL-PL-2508-00 40 x Apple flavour Candy Cartridges (Green) Ingredients: Isomalt, Natural flavouring, Aspartame (E951), Chlorophyllin copper complex (E141ii). 3D-FL-PL-2509-00 40 x Grape flavour Candy Cartridges (Purple) Ingredients: Isomalt,...
Page 14
CANDY CARTRIDGE REFILLS 3D-FL-PL-2510-00 40 x Cola flavour Candy Cartridges (Brown) Ingredients: Isomalt, Natural flavouring, Aspartame (E951), Sulphite ammonia caramel (E150d). 3D-FL-PL-2504-00 48 x mixed flavour Candy Cartridges (8 x Strawberry, Orange, Lemon, Apple, Grape, Cola) Ingredients: Isomalt, Natural flavouring with other natural flavourings, Aspartame (E951), Colours Fruit...
Whether you are a beginner, intermediate or an expert, there is something for everyone to make with the Polaroid CandyPlay 3D Pen. You can download and print lots of different stencils from our website and start creating your own amazing 3D candies!
MAINTENANCE Your Polaroid CandyPlay 3D pen must be cleaned thoroughly before the first use and again after every use. Please note: Before taking your pen apart, leave it for at least 10 minutes to completely cool, after...
CE Marking: Following all of the above required legislation and certification enables each of the Polaroid CandyPlay 3D Pens to proudly carry the CE Mark which confirms that they have been approved under each of these Directives.
Pen. If you have confirmed that you are using the correct power supply and the Pen is still not heating up, please contact the Polaroid 3D support team and they will be able to help find a solution for you.
Page 19
We suggest using a USB power adapter and plugging the Pen straight into a socket in the wall. If you have tried both of the above and the Pen is still slowing down, please contact the Polaroid 3D support team and they will be able to help find a solution for you.
Page 20
If so, please contact the Polaroid 3D support team and they will be able to help find a solution for you.
Page 21
FAQs AND TROUBLESHOOTING I can’t remove the Nozzle Cover from the Pen. If you are struggling to remove the Nozzle Cover from the Pen it may be because there is Candy between the Nozzle Cover and the Pen meaning it can potentially get stuck if the Candy has hardened.
Page 22
I can’t reassemble the Pen, some parts don’t fit and I am struggling to close the Loading Point and replace the Back Panel. If for any reason you can’t reassemble the Pen correctly, please contact the Polaroid 3D support team and they will be able to help find a solution for you.
Page 23
Candy has dissolved, thoroughly dry the Nozzle and replace it in the Pen. You can now continue drawing. If the above does not resolve the issue then please contact the Polaroid 3D Support Team and they will help you find a solution.