1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Server
  5. NA-1301
  6. Hardware installation manual

AXIOMTEK NA-1301 Hardware Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NA-1301
Hardware Installation Guide
For service person only

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NA-1301 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AXIOMTEK NA-1301

Summary of Contents for AXIOMTEK NA-1301

  • Page 1 NA-1301 Hardware Installation Guide For service person only...
  • Page 2 NA-1301 Network Appliance Server Hardware Installation Guide Disclaimers The information in this manual has been carefully checked and is believed to be accurate. AXIOMTEK Co., Ltd. assumes no responsibility for any infringements of patents or other rights of third parties, which may result from its use.
  • Page 3 NA-1301 Network Appliance Server Hardware Installation Guide Safety Approvals CE Marking FCC Class A FCC Compliance This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 4 Most electronic components are sensitive to static electrical charge. 2. Disconnect the power cords from the NA-1301 Network Appliance Platform before making any installation. Be sure both the system and the external devices are turned OFF. Sudden surge of power could ruin sensitive components.

  • Page 5: Table Of Contents

    NA-1301 Network Appliance Server Hardware Installation Guide Table of Contents Chapter 1 Introduction -------------------------------------------------------- --1 General Description ……………………………………… 1 Standard Features ……………………………………….. 2 Systems Specifications ………………………………… 3 Dimensions ………………………………………………… 6 Front Panel Outlets ……………………………………… 7 Rear Panel Outlets ………………………………………. 8 Indications of Front Panel ……………………………..

  • Page 6: General Description

    The NA-1301 can supports wonderful networking application platform by low power consumption, high availability and strongly computing processor capability. In general, the NA-1301 series is including two kinds of models for customer selection. Their different are in the LAN configuration as below table,...

  • Page 7: Chapter 1 Introduction

    NA-1301 Network Appliance Server Hardware Installation Guide Standard Features 1U-height rack-mount/stacked-up design Three gigabit LAN ports are by copper and fiber connections. Support BIOS redirected to COM port feature. Support RS-232 and two USB PCI 64-bit/ 66MHz expansion slot for another network security encryption board ...

  • Page 8: Systems Specifications

    NA-1301 Network Appliance Server Hardware Installation Guide System Specifications Hardware Form Factor: 1U rack-mount design Capacity: From 0 to 250GB and beyond, depending on hard disk drive capacity, Power Supply: Single 300W ATX HRP power supplies Standard ATX power input connector...
  • Page 9 NA-1301 Network Appliance Server Hardware Installation Guide BIOS: Phoenix AwardBIOS Rev.6.00 L2 Cache: Built-in in CPU Main Memory: 2 x 184-pin DDR DIMM sockets Maximum up to 4GB DDR Register ECC Memory DDR 266 or DDR 200 registered 184-pin ECC DDR SDRAM DIMM, does not support non-ECC DIMM or unbuffered DIMMs.72-bit wide x4 and x8 DIMMs using 128-Mb,...
  • Page 10 NA-1301 Network Appliance Server Hardware Installation Guide This page does not contain any information. Introduction...

  • Page 11: Dimensions

    NA-1301 Network Appliance Server Hardware Installation Guide Dimensions Unit: mm Introduction...

  • Page 12: Front Panel Outlets

    NA-1301 Network Appliance Server Hardware Installation Guide Front Panel Outlets Located at the front panel of the NA-1301 server are the I/O outlets for connections of serial and Ethernet interface-supported devices. You also can find out the LCD module. The NA-1301A Server Rear Panel...

  • Page 13: Rear Panel Outlets

    NA-1301 Network Appliance Server Hardware Installation Guide Rear Panel Outlets Located at the rear panel of the NA-1301 series platform are the I/O outlets. You will also find the main power switch and cooling fans. Introduction...

  • Page 14: Indications Of Front Panel

    NA-1301 Network Appliance Server Hardware Installation Guide Indications of Front Panel Power on LED 1. System and power on HDD LED Link/Active LED (single color) 1. The green LED is on when the HD has connection normally 2. The LED flashes when there is transmit or receive activity III.

  • Page 15: Chapter 2 Jumper And Connectors

    NA-1301 Network Appliance Server Hardware Installation Guide C h a p t e r 2 Jumpers and Connectors System Layout The NA-1301 series was assembled by following major components, They are ‘Main Board’, ‘Backplane’, ‘LCD Module’, ‘Power supply’, ‘Chassis’ and so on.

  • Page 16: Mother Board Layout

    NA-1301 Network Appliance Server Hardware Installation Guide 2.1.1 Main Board Layout (Jumpers and Connectors)

  • Page 17: Jumper Setting

    NA-1301 Network Appliance Server Hardware Installation Guide 2.1.2 Jumper Settings Making the proper jumper settings configures the main board to match the needs of your application. The following summary table lists all onboard jumpers and their corresponding functions and/or default settings.
  • Page 18 NA-1301 Network Appliance Server Hardware Installation Guide PCI MODE PCI-X MODE BUS Mode 33 MHz 66 MHz 66 MHz 100 MHz 133 MHz Maximum Slots Under normal condition, the mode and frequency of the PICMG Bus will be automatically adjusted according to the specification of the backplane and add-on card.

  • Page 19: Connectors

    NA-1301 Network Appliance Server Hardware Installation Guide 2.1.3 Connectors The connectors allow the CPU card to connect with other parts of the system. Some problems encountered by your system may be a result from loose or improper connections. Ensure that all connectors are in place and firmly attached.

  • Page 20: Backplane Layout

    NA-1301 Network Appliance Server Hardware Installation Guide NA-1301 Network Appliance Server Hardware Installation Guide 2.2.1 2.2.1 Backplane Layout (Jumpers and Connectors) Backplane Layout (Jumpers and Connectors)
  • Page 21 NA-1301 Network Appliance Server Hardware Installation Guide Connectors & Settings Description Jumper Open: System power ON/OFF via JP2 Short: System power always ON Short 1-2: System power ON/OFF either by front panel power button CN5 or via ACPI compliant Microsoft W indows software...
  • Page 22 NA-1301 Network Appliance Server Hardware Installation Guide Pin Assignments 20-pin ATX Power Connector: CN4 Brown 3.3V 3.3V Brown Blue -12V 3.3V Brown Black Black Green PS-ON Black Black Black Black Black White PW-OK Orange 5VSB Purple Yel low Output Power Connectors: CN3...

  • Page 23: Chapter 3 Installation Procedures

    Mounting screws for disk drive and screws used in this appliance for spare Quick installation guide Hardware Installation Guide NA-1301 cable kits (1 x 40-pin IDE, 1 x console cable, 1 x PS/2 keyboard and mouse cable, 1 x VGA cable) Mounting brackets for rack installation (left/right) x 2 Plastic stand for stack–up x 4...

  • Page 24: Setting Up The Appliance

    This section provides the information about the initial installation to setup the NA-1301 3.2.1 Removing and Replacing the Top Cover To gain access into the internal components of the NA-1301, you must follow the instructions given below to remove the top cover. Hardware Description...
  • Page 25 NA-1301 Network Appliance Server Hardware Installation Guide Hardware Description...

  • Page 26: Installing A Microprocessor (Cpu)

    NA-1301 Network Appliance Server Hardware Installation Guide Main Board 3.2.2 Installing a Microprocessor (CPU) 1. Using the method shown in Figure 1, place the new processor into the socket. Align the processor’s pin A1 with the arrow on the micro-FCPGA socket. The pin A1 of the processor is identified with an embroidered corner and the pin A1 of the socket is identified with a small arrow.

  • Page 27: Cpu Cooler Installation

    NA-1301 Network Appliance Server Hardware Installation Guide CPU Cooler Installation (PKP169C01F12) For the first time of installation, please do it step by step. For the second time or later installation, please start from step3. Step1. Remove the liner on the insulator.
  • Page 28 NA-1301 Network Appliance Server Hardware Installation Guide Step4. Fasten the cooler on the CPU as follow: Hardware Description...
  • Page 29 NA-1301 Network Appliance Server Hardware Installation Guide THE CLIP IS WELL FASTENING! Step5. Connect the housing to the Power-Socket. Hardware Description...

  • Page 30: Installing A Memory Module (Dimm)

    To accommodate the fast transfer rate of Ultra DMA/66/100, an 80-conductor cable (with 40 pin connectors on both ends) is necessary when installing Ultra DMA/66/100 drives. The NA-1301, on this aspect, can support a total of 2 Ultra DMA/66/100 drives. It is through the IDE Connector (CN4) where the 80-conductor cable is connected.

  • Page 31: Installing Display Interface

    NA-1301 Network Appliance Server Hardware Installation Guide Installing Display Interface 3.6.1 CRT Interface Controller The built-in ATI Rage XL is a high-performance super VGA display controller with onboard 8M bytes VGA RAM. It is capable of driving a wide array of CRT displays. It can also support CRT at a maximum resolution of up to 1600x1200 with 16-bit colors.

  • Page 32: Serial Port Irq Selection

    Request to Send(RTS) Transmit Data(TXD) Clear to Send(CTS) Data Terminal Ready Ring Indicator(RI) Installing Keyboard and PS/2 Mouse Connectors The NA-1301 provides External keyboard (CN32) and Mouse (CN33) interface with two 5-pin connectors for porting software easily by customer. Hardware Description...

  • Page 33: Installing Usb Controller (Optional)

    NA-1301 Network Appliance Server Hardware Installation Guide CN32/CN33 Installing USB Connector (Optional) The Universal Serial Bus (USB) connector on the main board is for installation of peripherals supporting the USB interface. CN2/CN5/CN6 is the 10-pin USB connector on the main board.

  • Page 34: Installing And Program Lcd Module

    NA-1301 Network Appliance Server Hardware Installation Guide 3.12 Installing and Program LCD Module 1. Working flow Communicate with PC through console cable a) Baud Rate = 9600 b) Data Bits = 8 c) Stop Bits = 2 d) Parity Check = None In fact, the COM Port is only use two signal as Tx and &...
  • Page 35 NA-1301 Network Appliance Server Hardware Installation Guide For example： The PC sends following string to LCM which is totally 80 characters String = Welcome>>AX89063************************Test>Program>>>>************************ LCM will display strings as following, Welcome>>AX89063 Test>Program>>>> As for the ‘*’ character, therefore it doesn’t show off in the LCM. But it will be stored in the RAM of LCM。...
  • Page 36 NA-1301 Network Appliance Server Hardware Installation Guide Power Supply Specifications...

  • Page 37: Chapter 4 Award Bios Utility

    NA-1301 Network Appliance Server Hardware Installation Guide C h a p t e r 4 Award BIOS Utility Chapter 8 describes the different settings available in the Award BIOS that comes with the SBC81871 CPU card. Also contained here are instructions on how to set up the BIOS configuration.
  • Page 38 NA-1301 Network Appliance Server Hardware Installation Guide We strongly recommend that you avoid making any changes to the chipset defaults. These defaults have been carefully chosen by both Award and your system manufacturer to provide the absolute maximum performance and reliability.
  • Page 39 NA-1301 Network Appliance Server Hardware Installation Guide number and press <Enter>. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information within this category. If your hard disk drive type does not match or is not listed, you can use Type User to define your own drive type manually.

  • Page 40: Advanced Bios Features

    NA-1301 Network Appliance Server Hardware Installation Guide Advanced BIOS Features This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Phoenix – AwardBIOS CMOS Setup Utility Advanced BIOS Features...
  • Page 41 NA-1301 Network Appliance Server Hardware Installation Guide Boot Other Device This item allows the user to enable/disable the boot device not listed on the First/Second/Third boot devices option above. The default setting is Enabled. Boot Up NumLock Status This option enables and disables the numberlock function of the keypad. The default value is “On”.
  • Page 42 NA-1301 Network Appliance Server Hardware Installation Guide The system will boot, but access to Setup will be denied if the Setup correct password is not entered at the prompt. NOTE: To disable security, select PASSWORD SETTING at Main Menu and then you will be asked to enter password.

  • Page 43: Advanced Chipset Features

    NA-1301 Network Appliance Server Hardware Installation Guide Advanced Chipset Features Since the features in this section are related to the chipset on the CPU board and are completely optimized, you are not recommended to change the default settings in this setup table unless you are well oriented with the chipset features.
  • Page 44 NA-1301 Network Appliance Server Hardware Installation Guide before DRAM refresh, the refresh may be incomplete and the DRAM may fail to retain data. Fast gives faster performance; and Slow gives more stable performance. This field applies only when synchronous DRAM is installed in the system.

  • Page 45: Integrated Peripheral

    NA-1301 Network Appliance Server Hardware Installation Guide Integrated Peripherals This option sets your hard disk configuration, mode and port. Phoenix – AwardBIOS CMOS Setup Utility Integrated Peripherals Enabled On-Chip Primary PCI IDE Item Help Auto IDE Primary Master PIO IDE Primary Slave PIO...
  • Page 46 NA-1301 Network Appliance Server Hardware Installation Guide and you have USB2.0 peripherals. The choice: Enabled, Disabled. USB Keyboard Support Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB keyboard. The choice: Enabled, Disabled.

  • Page 47: Power Management Setup

    NA-1301 Network Appliance Server Hardware Installation Guide Power Management Setup The Power Management Setup allows you to save energy of your system effectively. It will shut down the hard disk and turn OFF video display after a period of inactivity.
  • Page 48 NA-1301 Network Appliance Server Hardware Installation Guide W hen enabled and after the set time of system inactivity, all devices except the CPU will be shut off. The choice: Enabled, Disabled. HDD Power Down W hen enabled and after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active.

  • Page 49: Pnp/Pci Configuration

    NA-1301 Network Appliance Server Hardware Installation Guide PNP/PCI Configuration This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components.

  • Page 50: Pc Health Status

    NA-1301 Network Appliance Server Hardware Installation Guide PC Health Status This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value. CMOS Setup Utility-Copyright © 1984-2001 Award Software PC Health Status Current System Temp.

  • Page 51: Frequence / Voltage Control

    NA-1301 Network Appliance Server Hardware Installation Guide 4.10 Frequency/Voltage Control This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value. CMOS Setup Utility-Copyright © 1984-2001 Award Software...
  • Page 52 NA-1301 Network Appliance Server Hardware Installation Guide 4.12 Set Supervisor/User Password You can set either supervisor or user password, or both of then. The differences between are: supervisor password: can enter and change the options of the setup menus. user password: just can enter but do not have the right to change the options of the setup menus.
  • Page 53 NA-1301 Network Appliance Server Hardware Installation Guide 4.14 Quit Without Saving Select this option to exit the Setup utility without saving the changes you have made in this session. Typing “Y” will quit the Setup utility without saving the modifications. Typing “N” will return you to Setup utility.

  • Page 54: Appendix A Warning

    NA-1301 Network Appliance Server Hardware Installation Guide A p p e n d i x Warning This is a class A Product. In a domestic Environment this Product may cause radio interference in which case the user may be required to take adequate measures.
  • Page 55 NA-1301 Network Appliance Server Hardware Installation Guide This page does not contain any information. Warning...

This manual is also suitable for:

Na-1301aNa-1301b

Table of Contents