Product Specifications; Consumer Relations - Honeywell HHF175 Series Manual

PRODUCT SPECIFICATIONS

Model
Unit dims
Amps
Unit Voltage
Max Watts
Max BTUs
Operation Cost* To estimate the cost to operate this heater, multiply the watts used by .001 to
convert into kilowatts used. Then, multiply the kilowatts used by your local kilowatt electric rate
and the length of time you run the heater. For example, if your electric rate is $.1290** per kilowatt
hour and you ran this heater in constant high mode (1500 watts) for 4 hours, it would cost you $.77
cents to run the heater (1500 watts x 4 hours x .001) x .1290kwp = $.77 cents.
NOTE: Because the Low setting does not require as much electricity to operate, it is more energy
efficient and may be a better option if you are concerned about the higher power consumption when
the heater is on the High setting.
* Calculation (Total Wattage x .001) x Cost per Kilowatt Hour = Cost to operate
** Average Retail Price of Electricity to Ultimate Customer by End-Use, US Energy Information
Administration, August 2016.

CONSUMER RELATIONS

Call us toll-free at: 1-800-477-0457
E-mail: consumerrelations@kaz.com
Or visit our website at:
www.HoneywellPluggedIn.com/Heaters
Please be sure to specify a model number.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE
YOUR WARRANTY. DO NOT RETURN THE PRODUCT TO THE ORIGINAL PLACE OF PURCHASE. DO NOT
ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND
CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY.
HHF175 Series
5.4" L x 9.8" W x 11.3" H
12.5
120V, 60Hz
1500
5118
5