Setting The Alarm Repetition; Programming The Alarm Light (Sunrise) - Sonoro QUBO SO-220 Operating Manual

The alarm audio playback always starts with the minimum volume and gradually
increases to the specified volume level.
8.4

Setting the alarm repetition

After you have set and confirmed the alarm volume, you can set the alarm repetition.
Fig, 29: Setting the alarm repetition
1. Turn the click wheel to set the desired alarm repetition (Fig. 29). You can choose
between the following settings:
• Once
• Daily
• At weekends
• On weekdays
2. Press the click wheel or the [OK] button on the remote control to confirm your
setting.
W The alarm repetition is set.
8.5

Programming the alarm light (sunrise)

After you have set and confirmed the alarm repetition, you can set whether you would
also like to be woken with an alarm light (with sonoroLIGHT only).
1. Ensure that sonoroLIGHT is connected and that its dimmer function is switched on.
Fig, 30: Setting alarm light
2. Turn the click wheel to switch the alarm light on and off. (Fig. 30).
3. Press the click wheel or the [OK] button on the remote control to confirm your
setting.
W The alarm light is programmed.
To set the alarm light please see 'Setting alarm light' on page 68.
74
© sonoro audio GmbH 2018