Connecting Sonorolight; Connecting The Heaphones - Sonoro QUBO SO-220 Operating Manual

2. Insert the supplied button cell (CR2032, 3 V) with the label (+) side up.
3. Close the battery compartment.
6.6

Connecting sonoroLIGHT

In order to be able to control a lamp using the Bluetooth function, you must connect
sonoroLIGHT and QUBO once. Connected devices are stored and later connected
automatically.
Follow the sonoroLIGHT operating instructions.
1. Plug sonoroLIGHT into a socket.
2. Ensure that sonoroLIGHT and QUBO are no more than 10m away from one
another. Otherwise, no connection can be established.
3. Press the button on your sonoroLIGHT.
W sonoroLIGHT searches for another Bluetooth device.
4. Press the [Light] button on your QUBO and hold it for 3 seconds.
W The devices are connected to one another. No password needs to be
entered. Once the devices are successfully connected, the [Light] button
lights up in white.
5. Connect a lamp to the socket on your sonoroLIGHT.
6.7 Connecting the headphones
The headphones can be connected to the device with the 3.5 mm stereo jacks (not
included in the package).
1. Turn the click wheel to the left to set the volume to minimum.
2. Insert the headset jack into the headset port at the back of the device.
3. Slowly turn the click wheel to the right to increase the volume.
64
© sonoro audio GmbH 2018