Unpacking The Device And Commencing Operation; Unpacking The Device; Inserting The Battery; Connecting The Power Supply - Sonoro QUBO SO-220 Operating Manual

6.

Unpacking the device and commencing operation

Only use connection cables and external devices that comply with the
electromagnetic compatibility and insulation quality of this device.
6.1

Unpacking the device

All parts of the device are delivered in a single cardboard box.
1. Unpack the device and all accessories, and check the contents for completeness
and integrity.
2. Place the device in a suitable location and remove the protective film from the
display.
6.2

Inserting the battery

The battery ensures the clock functions in case of power failure.
Fig, 7: Inserting the battery
1. Open the battery compartment cover on the back of the device with a small coin.
2. Insert the supplied battery with the label side up.
3. Insert the battery compartment cover and close with a small coin.
6.3

Connecting the power supply

Power is supplied to the device via the AC adapter (included). The AC adapter with
universal adapter must be connected before use.
62
© sonoro audio GmbH 2018