Alarm Function; Setting The Alarm Time - Sonoro QUBO SO-220 Operating Manual

If the device is turned off, you can wait longer.
4. Press the [Light] button again to switch the light off. If the device is turned off, you
can turn the click wheel directly to switch the light on and set the brightness.
8.

Alarm function

You can use the device to wake up with FM/DAB radio, CD, Relax Music or alarm
ringtones. The alarm functions can also be set in the device's Standby mode.
The alarm setup menu is structured as follows:
W Set the Alarm Time
W Set the Alarm Source
W Set the Alarm Volume
W Set the Alarm Repetition
W End
If you do not press any buttons for approx, 10 seconds when setting the alarm, the
setting is terminated without saving it.
8.1

Setting the alarm time

Fig, 26: Setting Alarm 1
1. Keep the [Alarm 1] or [Alarm 2] button pressed.
W The display shows:
[Set Alarm 1] (Fig. 26) or [Set Alarm 2] menu.
2. Turn the click wheel to set the hours.
3. Press the click wheel to confirm the entry.
W The minute display flashes.
4. Turn the click wheel to set the minutes.
5. Press the click wheel to confirm the entry.
Use the [Next ] or [Previous] button to switch between the hours and minutes
display.
W The alarm time is set.
72
© sonoro audio GmbH 2018