Setting The Sleeptimer - Sonoro QUBO SO-220 Operating Manual

1. Go to the corresponding submenu or press the corresponding button on the
remote control.
2. To adjust the bass, select [Bass] (Fig. 21/A) and turn the click wheel. To adjust the
treble, select [Treble] (Fig. 21/B) and turn the click wheel.
Alternatively, you can also use the [Next] or [Previous] buttons to adjust the values.
3. Press the click wheel to adopt the settings or wait 10 seconds.
7.5 Setting the Sleep Timer
The Sleep Timer is an automatic power-off function that switches the device to
Standby mode after the specified time has expired.
Setting the Sleep Timer
Fig, 22: Switching on/off the Sleep Timer
1. Press [SLEEP] button on the top of the device or the remote control.
W The display shows the [SLEEP] symbol (Fig. 23/1).
Switching off the Sleep Timer
2. To switch off the sleep timer, press the [SLEEP] button again
W The symbol on the display is hidden.
If the device was switched off by the Sleep Timer, it will start in the last heard mode
when you turn it on again.
Setting the time interval for the Sleep Timer
Fig, 23: Setting the time interval for the Sleep Timer
1. Hold down the[SLEEP] button on the top of the device or the remote control.
W The Sleep Timer appears (Fig. 23) and the Sleep symbol flashes.
(Fig. 23/1)
2. Turn the click wheel to select the desired time interval length. (Fig. 23/2). The
maximum time interval is 120 minutes.
70
© sonoro audio GmbH 2018