Table of Contents
Advertisement
To avoid serious personal injury, do not
attempt to use the product until you read
thoroughly and understand completely the
operator's manual.
all bystanders, especially children and
pets, at least 15 m from the operating
area.
Beware of blade thrust.
The guard is not intended for use with a
toothed saw type blade.
Rotational direction and maximum speed
7,370
of the shaft for the cutting attachment.
min
-1
Wear non-slip safety footwear when using
the product.
Wear non-slip, heavy-duty gloves.
Wear eye, ear, and head protection.
To reduce the risk of injury or damage,
avoid contact with any hot surface.
Keep hands away from blades.
Use unleaded petrol intended for motor
vehicle use with an octane rating of 91 or
higher.
Use 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each
time before refueling.
Blade
position.
Fully press and release the primer bulb
Pull the starter grip to start the engine.
Squeeze throttle trigger to run.
4
Guaranteed sound power level
Sound pressure level at idle
Choke closed
Choke open
Pull: Quick release tab
Regulatory compliance mark
spool to the cutting means, this symbol
should be visible to the operator
Stop the product
SYMBOLS IN THIS MANUAL
Parts or accessories sold separately
Note
Warning
Lock
Unlock
Do not smoke
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
Hide quick links:
Advertisement
Table of Contents
