Step 2: Preparing For Network Connection; Step 3: Configuración Fácil - Sony BDP-S6700 Operating Instructions Manual

Step 2: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to "Step 3:
Configuración fácil" (page 20).
Configuración por cable
Use a LAN cable to connect to the LAN
(100) terminal on the player.
LAN cable
(not supplied)
Broadband
router
z
The use of a shielded and straight interface
cable (LAN cable) is recommended.
Configuración inalámbrica
Use the wireless LAN that is built into
the player.
LAN cable (not supplied)
Wireless LAN
router
20
ADSL modem/ Internet
Cable modem
ADSL modem/ Internet
Cable modem
Step 3: Configuración
fácil
When turned on for the first time
Wait for a short while before the
player turns on and starts
[Configuración de inicio fácil].
1
Insert two Size AAA (R03)
batteries by matching the 3 and
# ends on the batteries to the
markings inside the battery
compartment of the remote.
2
Connect the supplied AC adaptor
and AC power cord in the numeric
order shown below. When
removing them, do so in reverse
order.
1 to DC (direct current) IN 12 V
AC adaptor (supplied)
2
AC power cord (supplied)
3
to mains