Step 2: Preparing For Network Connection; Step 3: Easysetup - Sony Blue-rayDisc BDP-BX120 Operating Instructions Manual

Step 2: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to "Step 3: Easy
Setup" (page 17).
....
Use a LAN cable to connect to the LAN
(100) temfinal on the player.
,,,,,,,,,,,,,,, LAN cable
mmml
Broadband ADSL modem/
router Cable modem
Intemet
The use of a shielded and straight interface
cable (LAN cable) is recommended.
Step 3: EasySetup
Whenturned on forthefirsttime
Wait for a short while before the
playerturns on and starts [Easy
InitialSettings].
InserttwoSizeAAA (RO3)
batteries bymatching the@ and
O ends onthebatteries tothe
markings inside the battery
compartment of theremote.
2
Connect t hesupplied ACadaptor
in thenumeric order shown
below.Whenremoving them,do
soin reverse order.
G'3
¢D
_=.
=
C,O
¢D
Use the wireless LAN that is built into
the player.
supplied)
Wireless LAN ADSL modem/ Internet
router Cable modem
to DC IN
3
PressI/_ toturnontheplayer.
17