Sony BDP-S6700 Operating Instructions Manual page 41

, The connection registration
information has been erased. Perform
the connection operation again.
There is no sound, the sound skips or
fluctuates, or the connection is lost.
, Move the Bluetooth device closer to
the player.
, Make sure the player is not receiving
any interference from a Wi-Fi
network, other Bluetooth device, other
2.4 GHz wireless device, or
microwave oven.
, Check that the Bluetooth connection is
properly made between this player and
the Bluetooth device.
, Connect this player and the Bluetooth
device again.
, Keep the player away from metal
objects or surfaces.
Control para HDMI (BRAVIA
Sync)
The [Control para HDMI] function
does not work (BRAVIA Sync).
, Check that [Control para HDMI] in
[Ajustes HDMI] is set to [Activar]
(page 34).
, If you change the HDMI connection,
turn the player off and on again.
, If power failure occurs, set [Control
para HDMI] in [Ajustes HDMI] to
[No], then set [Control para HDMI] in
[Ajustes HDMI] to [Activar]
(page 34).
, Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is
compatible with the [Control para
HDMI] function.
– the connected component's setting
for the [Control para HDMI]
function is correct.
, When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control para
HDMI] function, you may be unable
to control the TV from the player.
– if you change the HDMI
connection, disconnect and
reconnect the AC power cord, or a
power failure occurs, try the
following: Switch the input
1
selector of the AV amplifier
(receiver) so that the picture from
the player appears on the TV screen.
Set [Control para HDMI] in
2
[Ajustes HDMI] to [No], then set
[Control para HDMI] in [Ajustes
HDMI] to [Activar] (page 34).
Refer to the instruction manual
supplied with the AV amplifier
(receiver).
The System Power-Off function does
not work (BRAVIA Sync).
, Check that [Control para HDMI] and
[Vinculado con apagado del TV] in
[Ajustes HDMI] are set to [Activar]
and [Válido] (page 34).
41